Including:Main feed line system,Pan feeding line system,Nipple drinking line system,Ventilation system,Automatic environment and power contrl system,Cooling pad system,Spraying and disinfecting system,Heating system.
1.Main feed line system:
Main feed line system components:
*Silo with standard ladder and guard railing is safe and reliable.
*Solid connection and good sealing performance.
*Steel sheet double-layer galvanized ensure a service life of more than 10 years.
*FRP(Fiber reinforced plastics) silo has a good performance of water-roof,moisture-proof,and insulation,which ensure a long service life.
Parameter of silo:
Frequency:50HZ,three-phase AC current
Feed level Sensor:
Germany IFM feed level sensor
Diameter of conveying pipe:75*3.6mm.
Helical spring auger from South Africa
Radius of bending pipe:R1500-2000
2.Automatic Pan feeding system:
This system convey feed through the rotation of helical spring auger,inclulding main feed line and pan feeding lines.
Main feed line:silo/manpower hopper is the beginning of main feed line.there is a feed sensor at the end of main feed line which controls motor on and off to achieve automatic feed delivery.
Advantages:Reduce labor intensity,one person is enough for one house.
Pan feeding line:There is a feed sensor at the end of each feeding line which controls motor on and off to achieve automatic feed delivery.
Installation layout picture of main feed line in chicken house:
Main features of broiler feed pan:
*Outside adjustment feed pan has 6 gears of feed amount,and the other kinds has 13 gears.
*Feed pan slide switch could adjust feed flow until it is filled.
*Outside adjustment feed pan is more convenient,accurate and quick to adjust feed flow,the operation is to hand by the out side grids and rotate up and down.
*Pan bottom can be disassembled on the fround,working for day-old chickens.
*V-Pan plate design can reduce feed storage on bottom,so birds can always eat fresh feed .The design can also prevent the birds from staying too long on the plate.
*The edge of pan plate tilt towards the center,which can avoid waste of food.
*The smooth edge can prevent the craw of birds from hurting and make sure safety and comfort feeding.
*Feed pan installation has fixed type or swing type.
(Taiwan motor with overload protection of IP55 grade)
Frequency:50HZ,three-phase AC current.
Material:hot-drip galvanized sheet
Pan feeding system:
Material:hot-dip galvanized steel pipe the zinc coating amount is more than 275g/m2.
Spring auger:Imported from South Africa.